[DG11] C-Series Seatalk to NMEA 0183 integration

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] C-Series Seatalk to NMEA 0183 integration

08-15-19, 03:59 AM

Post: #9

Louise - Raymarine - Moderator Offline

Administrator

Posts: 867
Joined: Sep 2018
Reputation: 1

RE: [DG11] C-Series Seatalk to NMEA 0183 integration

Dear Lars,

Many thanks for your response.

The autopilot should not be connected to the AIS700 NMEA in port, there is no requirement for this.

Can you connect the AIS and C80 independently without the multiplexer, autopilot, VHF or PC connected and see if the AIS performs as you would expect.

If you could continue communication at [email protected] and we will be able to assist resolving your issue.

Many Thanks
Louise

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] C-Series Seatalk to NMEA 0183 integration - loevevang - 06-18-19, 01:33 AM

RE: [DG11] C-Series Seatalk to NMEA 0183 integration - Derek - Raymarine - Moderator - 06-18-19, 10:39 AM

RE: [DG11] C-Series Seatalk to NMEA 0183 integration - marlahe - 07-23-19, 06:54 PM

RE: [DG11] C-Series Seatalk to NMEA 0183 integration - marlahe - 08-11-19, 04:55 PM

RE: [DG11] C-Series Seatalk to NMEA 0183 integration - Derek - Raymarine - Moderator - 07-24-19, 06:29 AM

RE: [DG11] C-Series Seatalk to NMEA 0183 integration - marlahe - 07-28-19, 04:08 PM

RE: [DG11] C-Series Seatalk to NMEA 0183 integration - Louise - Raymarine - Moderator - 08-01-19, 09:12 AM

RE: [DG11] C-Series Seatalk to NMEA 0183 integration - marlahe - 08-02-19, 01:48 PM

RE: [DG11] C-Series Seatalk to NMEA 0183 integration - Louise - Raymarine - Moderator - 08-15-19 03:59 AM

User(s) browsing this thread: 2 Guest(s)