Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] ECI100 bidirectional?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] ECI100 bidirectional?
08-16-19, 01:56 AM (This post was last modified: 08-19-19 03:14 PM by Chuck - Raymarine - Moderator.)
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] ECI100 bidirectional?
Hello BernieK,

No, by design the ECI-100 is an 'airlock', so that our network cannot have any chance of adversely affecting an engine control system. The only data it sends back to the engine network is autopilot control commands in approved drive-by-wire steering systems (with our EV2 autopilots.)

The Yamaha 6YG-8A2D-00-00 is an alternate gateway which allows use of the new Yamaha app on Lighthouse 3.9 and later, though I don't know what data it sends back to the Yamaha side. See the LH3 software history at http://www.raymarine.com/software-update...1529981718 and the updated user manual at http://www.raymarine.com/manuals-documents/ for info on the Yamaha app.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] ECI100 bidirectional? - BernieK - 08-09-19, 08:06 PM
RE: [TG11] ECI100 bidirectional? - Tom - Raymarine - Moderator - 08-16-19 01:56 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication