The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / New Navionics Platinum+ on Classic E-80

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Navionics Platinum+ on Classic E-80
06-08-16, 03:17 PM
Post: #1
John Russo Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2016
Reputation: 0
New Navionics Platinum+ on Classic E-80
I just purchased a new Navionics + card and updated it on line with their guidance at their site and tried loading it on my Classic E-80 and it caused the E-80 to freeze. I could not even operate the OK button to accept the opening terms. Neither could I turn off the Display. My old card works just fine and my latest software on the unit is v5.69.

I called Raymarine and was told that the new + has too much data on it so I should switch to straight Platinum. I am also trying to resolve this with Navionics help so I could operate with the latest charts. My old chip is 2006. This new chip also has sonar data on it and everything can be updated free for 1 year. Could you please advise.

Thank you,
John
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
New Navionics Platinum+ on Classic E-80 - John Russo - 06-08-16 03:17 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication