[CA11] E90\W not receiving all data from E140\W

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] E90\W not receiving all data from E140\W

08-17-19, 12:32 PM (This post was last modified: 08-22-19 02:44 PM by Chuck - Raymarine - Moderator.)

Post: #1

zed1776 Offline

Junior Member

Posts: 6
Joined: Aug 2019
Reputation: 0

[CA11] E90\W not receiving all data from E140\W

I have a E140\W master chart plotter at my chart table and an E90\W on the helm pod. The E90\W is receiving all the chart data except no depth data is being displayed.
Is there a configuration setting I am missing? Rebooting doesn't help.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] E90\W not receiving all data from E140\W - zed1776 - 08-17-19 12:32 PM

RE: [CA11] E90\W not receiving all data from E140\W - Chuck - Raymarine - Moderator - 08-22-19, 03:03 PM

RE: [CA11] E90\W not receiving all data from E140\W - zed1776 - 08-27-19, 03:20 PM

RE: [CA11] E90\W not receiving all data from E140\W - Chuck - Raymarine - Moderator - 08-27-19, 03:56 PM

RE: [CA11] E90\W not receiving all data from E140\W - zed1776 - 09-01-19, 08:18 PM

RE: [CA11] E90\W not receiving all data from E140\W - Chuck - Raymarine - Moderator - 09-09-19, 08:35 AM

RE: [CA11] E90\W not receiving all data from E140\W - zed1776 - 09-10-19, 07:20 PM

RE: [CA11] E90\W not receiving all data from E140\W - Chuck - Raymarine - Moderator - 09-11-19, 07:07 AM

User(s) browsing this thread: 2 Guest(s)