Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Fishfinder tutorial
08-23-19, 02:37 AM
Post: #2
RE: [TG11] Fishfinder tutorial
Hello Bernie,

I don't know if there's another video, but I recorded some video for just such a tutorial here in Sydney. I don't remember ever releasing it though (I'm no screen icon, and the home-made cinematography from my mate holding a camera on a 6m boat 20nm out at Brown's Mountain, rolling beam-on to the swell, with 15 knots of wind noise and a chop slapping against the aluminium hull, was probably not as good as it sounds.) The horizon in the background would have made you sick watching it anyway, and I suspect we deleted the raw video.

Here's a 2-page quick guide that I made at about the same time though from the same info - have a read through this and let me know what questions come up. It runs through my preferred manual gain process for CP300/CP450C (for newer sounders, don't use manual: Auto does a much better job than any mere mortal can in Manual.)

Tom


Attached File(s)
.pdf  Raymarine_sounder_quick_reference-201407TG.pdf (Size: 423.33 KB / Downloads: 445)

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Fishfinder tutorial - BernieK - 08-11-19, 12:10 AM
RE: [TG11] Fishfinder tutorial - Tom - Raymarine - Moderator - 08-23-19 02:37 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)