[LW] [LW11] Wind speed data is 0.0 after installing V3.10.42

[jorbro]

Hi Louise
I found the fault - in the junctionbox from the mast the yellow connection was bad. Now everything is working proberly again.
Strange was that the fault came just after upgrading from .39 to .42 version.

Thank you for your time.
Rg Jorgen

(08-23-19 03:56 AM)Louise - Raymarine - Moderator Wrote:  Dear jorbro,

We are not aware of any issues with the Axiom not displaying wind speed data in Lighthouse 3.10.42. Are you seeing the wind speed on your i70 instruments?

This has only happened since upgrading the software from Lighthouse 3.10.39 to Lighthouse 3.10.42?

It is true wind speed and apparent wind speed data that is missing from the Axiom data page? You have apparent and true wind angle? Is this the case when stationary and underway?

Please check all connections (including any joins in the transducer cable) to ensure they are healthy and free from corrossion. Are there any breaks or styresseful bends in the transducer cable?

Is the wind transducer correctly connected to the iTC-5? Are the cups spinning freely. Furthermore, please refer to this FAQ on testing your wind transducer.

Many Thanks
Louise