Raymarine forum / Raymarine Forums / Fishfinders v / [DG] [DG11] New install CPT-110 not found

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] New install CPT-110 not found
08-26-19, 10:35 AM
Post: #4
developers Offline
Junior Member
**
 		Posts: 12
Joined: Dec 2017
Reputation: 0
RE: [DG11] New install CPT-110 not found
Hi Louise
Thanks for the help.

Can you confirm if you are running Lighthouse2 v19.03 in the eS98?
Yes

Can you confirm the extension you are using is a Raymarine transducer extension cable and not an extension that has been made for the purpose by yourself or a third party?

Yes and no sonar detected with or without extension

Are there any error messages being displayed in the eS98 in the fishfinder app?

Yes - No sonar source available

In the fishfinder app>menu>channel - have you the option to select this to CPT110 DV?

No option to select any transponder.

The transducer does not requires a manual switch on, the CPT110 is powered from the eS98 automatically when connected, you should hear a fast tick come from the transducer when it is powered on. Can you hear this?

No ticking sound at all.

Regards

Jem
Oceanis 40 es98 CPT110, AIS 650 dedicated aerial and gps, two i70s, transponder - digital depth speed temperature -ST60 masthead wind via analogue to stng pod, P70s control head, Seatalkng to Seatalk interface to S3g autopilot to type 2 linear drive & Ray240e VHF both aquiring gps via Seatalk interface.
Find all posts by this user
Thread Closed 


Messages In This Thread
RE: [DG11] New install CPT-110 not found - developers - 08-26-19 10:35 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication