Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] Axiom units chane from ft/miles to m/km

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom units chane from ft/miles to m/km
08-27-19, 02:01 AM (This post was last modified: 09-09-19 01:27 PM by Chuck - Raymarine - Moderator.)
Post: #6
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] Axiom units chane from ft/miles to m/km
Hello karlista,

Can you tell me what products you do have in your system? Ideally, if you could go to Home > Settings > Network > Diagnostics >Product Info and then Save All Data, then post the data file (you choose the filename when you save, but it's normally something like 'diagnostics.json') back here, that would be very helpful. That will tell me devices, software versions and serial numbers.

Thanks,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Axiom units chane from ft/miles to m/km - Tom - Raymarine - Moderator - 08-27-19 02:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication