The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] ST60 Wind displays wrong angle
08-30-19, 06:53 AM (This post was last modified: 08-30-19 08:48 AM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] ST60 Wind displays wrong angle
Dear Sirs,
I'm experiencing an issue on my ST60 Wind instrument. Some times (not always) the displayed wind angle is wrong. The error can be big, like 60° and more and always move to port side (i.e. correct display should be 30° starboard when the display reports 30° port).
I have tried to switch off the ST60 instrument, but I have seen that NMEA 0183 messages MWD keeps on carrying wrong wind angle direction, like they are transimtted directly from the transducer and not from the ST60 Wind instrument.
Next weekend I will try to recalibrate the wind instrument making 2 circles after having swiched on the wind instrument, and also I will run the self test that I have found in the forum.
Any other suggestion is much well appreciated.
Thank in advance.
Fabrizio

Fabrizio
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] ST60 Wind displays wrong angle - fdipeppo - 08-30-19 06:53 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)