Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Following Route on E80/E120 MFDs

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Following Route on E80/E120 MFDs
08-30-19, 08:57 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Following Route on E80/E120 MFDs
Welcome to the Raymarine Forum anamcarasailing,

Should the system not have acquired a GPS position FIX or should the system currently be navigating to a waypoint. To determine the latter, it is recommended that you add the Waypoint Info data item to the Databar ... if not currently engaged in navigation, the data item will report NOT FOLLOWING instead of the name of the waypoint being navigated to. If this data item reports the name of a waypoint and the system is receiving a GPS position FIX, then commanding the MFD to STOP FOLLOW will permit the user to command navigation (i.e. Follow Route or Go To Waypoint/Cursor).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Following Route on E80/E120 MFDs - Chuck - Raymarine - Moderator - 08-30-19 08:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication