[JH] [JH11] Micro-talk failure

[John - Raymarine - Moderator]

Michael,

Thank you for reaching out to us on the forum. You have done a good job trouble shooting to this point. You are correct it seems that the Micronet is not communicating at this point. You can check the health of the Micronet through the T113 with the health check. You can find the manual for the T113 here. The relevant section to get to the health is on page 20 and the description of what you are seeing is on page 29. The Microtalk gateway will come up on that list with a name of Type 7. If you do not see the proper reading in reading as described the atempting the autonetwork procegure with the T113, T120, and Microtalk gate would be the next step. You will need to take the T120 off the mast to perform this with all 3 items within 12 inches of each other.

Best Regards
John