[JH11] Es127 not connecting to cp 470

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[JH] [JH11] Es127 not connecting to cp 470

09-01-19, 02:07 PM (This post was last modified: 09-03-19 12:04 PM by John - Raymarine - Moderator.)

Post: #1

RKW68

Junior Member

Posts: 25
Joined: Oct 2018
Reputation: 0

[JH11] Es127 not connecting to cp 470

I am following up this from a previous post... have a es127 connected to a new CP 470 and a new M265 chirp.. the mfd was previously connected to a M260. The MFD would not select transducer and message states sounder selected not available. Now the new transducer is connected to cp470 which is connected to es127 via F to F cable. Message says transducer not selected (select transducer) no transducer connected .... no transducers available to select from in drop down. 2 amber blinks on CP... very frustrated with my purchases here

« Next Oldest | Next Newest »

Messages In This Thread

[JH11] Es127 not connecting to cp 470 - RKW68 - 09-01-19 02:07 PM

RE: [JH11] Es127 not connecting to cp 470 - John - Raymarine - Moderator - 09-03-19, 02:32 PM

RE: [JH11] Es127 not connecting to cp 470 - RKW68 - 09-04-19, 05:40 AM

RE: [JH11] Es127 not connecting to cp 470 - John - Raymarine - Moderator - 09-04-19, 09:19 AM

RE: [JH11] Es127 not connecting to cp 470 - RKW68 - 09-13-19, 06:30 AM

RE: [JH11] Es127 not connecting to cp 470 - John - Raymarine - Moderator - 09-13-19, 08:37 AM

RE: [JH11] Es127 not connecting to cp 470 - RKW68 - 09-13-19, 10:15 AM

RE: [JH11] Es127 not connecting to cp 470 - John - Raymarine - Moderator - 09-13-19, 11:52 AM

User(s) browsing this thread: 2 Guest(s)