The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [TG] Tri-ducer not reading depth accurately

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Tri-ducer not reading depth accurately
09-03-19, 04:16 PM (This post was last modified: 09-10-19 11:30 PM by Tom - Raymarine - Moderator.)
Post: #1
L'Attitude Offline
Junior Member
**
 		Posts: 1
Joined: May 2019
Reputation: 0
Tri-ducer not reading depth accurately
I have a brand new sailboat equipped with Raymarine. The Axiom 9 is the MFD and the tri-ducer connected through the iTC5 for my speed, depth and temp. The problem is that when the water depth exceeds 75 ft. the depth display reads -.- and comes back to reading the depth when I'm in under 75' of water. My dealer got a new tri-ducer for me to field test but I got the same results. I have not had a chance to field test a new iTC5 yet.

What am I missing? Everything that I read says that it should be good to 100 meters in depth. Is there a setting on the i70S or the Axiom that I'm missing?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Tri-ducer not reading depth accurately - L'Attitude - 09-03-19 04:16 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication