[DG11] DRIVE STOPPED troubleshooting

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] DRIVE STOPPED troubleshooting

09-04-19, 11:52 AM (This post was last modified: 02-28-20 01:10 PM by Chuck - Raymarine - Moderator.)

Post: #5

phanty Offline

Junior Member

Posts: 3
Joined: Jun 2017
Reputation: 0

RE: [DG11] DRIVE STOPPED troubleshooting

Hi Derek,
Weâ€™ve run through the setup options many times, tried the different modes and updates all the firmware. Under difficult conditions the motor still stops so weâ€™ve ordered a 400 series unit. It soundsi like thats what should have been installed to begin with because we have a heavy boat, 24000 lbs and Mamba steering with a Keanow (sp) rotary drive.
Is there anything I can do through Raymarine to return my type 200 ACU?

Mike

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] DRIVE STOPPED troubleshooting - alx - 06-02-16, 01:33 PM

RE: [DG11] DRIVE STOPPED troubleshooting - Chuck - Raymarine - Moderator - 06-03-16, 01:35 PM

RE: [DG11] DRIVE STOPPED troubleshooting - phanty - 09-02-19, 05:53 AM

RE: [DG11] DRIVE STOPPED troubleshooting - Derek - Raymarine - Moderator - 09-04-19, 08:27 AM

RE: [DG11] DRIVE STOPPED troubleshooting - phanty - 09-04-19 11:52 AM

RE: [DG11] DRIVE STOPPED troubleshooting - Derek - Raymarine - Moderator - 09-05-19, 11:16 AM

RE: [DG11] DRIVE STOPPED troubleshooting - phanty - 09-05-19, 03:06 PM

RE: [DG11] DRIVE STOPPED troubleshooting - Derek - Raymarine - Moderator - 09-06-19, 10:47 AM

RE: [DG11] DRIVE STOPPED troubleshooting - Kwolfel - 02-28-20, 11:42 AM

RE: [DG11] DRIVE STOPPED troubleshooting - Derek - Raymarine - Moderator - 03-03-20, 04:14 AM

User(s) browsing this thread: 1 Guest(s)