The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [LW] [LW11] ITC-5, Depth Transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] ITC-5, Depth Transducer
09-06-19, 06:36 AM (This post was last modified: 09-06-19 08:35 AM by Louise - Raymarine - Moderator.)
Post: #1
9203R Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2019
Reputation: 0
[LW11] ITC-5, Depth Transducer
Hi,

I recently added an i70s and ITC-5 to my system, which previously consisted of ST60 Speed, ST60 Depth and i60 Wind.

I have connected the Speed and Wind transducer cables to the ITC-5 and am successfully receiving that data on STNG and ST1.

However, whilst I get Depth data on ST1 with the transducer connected to the ST60 Depth, when I connected the transducer cables to the ITC-5 instead I couldn't get any Depth data on STNG or ST1, and the i70s did not show the ITC-5 as a source for Depth.

Is it possible that my depth transducer is compatible with the ST60 but not with the ITC-5? I think it is a pretty standard Airmar one. Anything else I should try? There was a big magnet clipped on to the depth transducer cable, what does that do?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] ITC-5, Depth Transducer - 9203R - 09-06-19 06:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication