The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / A97 to ST6002/S2 autopilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A97 to ST6002/S2 autopilot
02-24-16, 06:58 PM
Post: #1
hudsoncl Offline
Chris
**
 		Posts: 12
Joined: Feb 2016
Reputation: 0
A97 to ST6002/S2 autopilot
I just received my new A97 MFD. In the online installation manual it says I can connect my Seatalk ST6002 Pilot controller via a SeaTalk to SeaTalkng converter. I bought the converter, but the manual that came with the converter says "A SeaTalk autopilot or associated controller must not be connected to the SeaTalk - SeaTalkng converter". The manual was printed 06-2010 so maybe this is outdated information?

Also, the converter manual says "Power must not be connected into the SeaTalk spur", even though there's a picture in the manual showing this. My plan was to power my new SeaTalkng backbone through one of the converter spur ports, is this acceptable?

Thanks,
Chris
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
A97 to ST6002/S2 autopilot - hudsoncl - 02-24-16 06:58 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication