European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Multifunction Displays 
/
[TG] [TG11] Interfacing with Yanmar 3JH40 motor
/
[TG] [TG11] Interfacing with Yanmar 3JH40 motor
|
[TG] [TG11] Interfacing with Yanmar 3JH40 motor
|
|
09-10-19, 06:23 PM
(This post was last modified: 09-11-19 11:46 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
 [TG11] Interfacing with Yanmar 3JH40 motor
installing two new Yanmar 3JH40 engines on a Catamaran and wish to interface them to the Raymarine plotter (eS127).
This is a new engine and information is not available on the Raymarine ECI site. Can you confirm if this engine can interface direct to the Raymarine plotter exchanging engine monitoring information in NEMA format direct to the Seatalking data bus – or not, and if an ECI-100 is required (I understand it may not be with this new Yanmar NEMA interface. Can you please confirm if this is possible and what connectors are needed. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[TG11] Interfacing with Yanmar 3JH40 motor - Kmarineltd - 09-10-19 06:23 PM
RE: [TG11] Interfacing with Yanmar 3JH40 motor - Tom - Raymarine - Moderator - 09-11-19, 09:35 PM
|
User(s) browsing this thread: 1 Guest(s)