Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] interfacing EV-1 to Coastal navigator software

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] interfacing EV-1 to Coastal navigator software
09-14-19, 06:58 AM (This post was last modified: 09-16-19 08:41 AM by Chuck - Raymarine - Moderator.)
Post: #3
captainjoez Offline
Junior Member
**
 		Posts: 2
Joined: Jun 2017
Reputation: 0
RE: [CA11] interfacing EV-1 to Coastal navigator software
According to Vesper, the unit will convert NEMA 0183 to NEMA 2000 and visa-versa. I have my laptop with Rose Point's Coastal Navigator software connected to the Vesper XB-8000 along with the Raymarine autopilot. When I command the nav system to activate route, I get no response from the autopilot.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] interfacing EV-1 to Coastal navigator software - captainjoez - 09-14-19 06:58 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication