Raymarine forum / Raymarine Forums / Multifunction Displays v / RL70C not communicating with RC631

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RL70C not communicating with RC631
06-10-16, 12:01 PM (This post was last modified: 06-10-16 12:01 PM by Chuck - Raymarine - Moderator.)
Post: #19
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: RL70C not communicating with RC631
The autopilot control head should indeed function as it had in the past ... in this case use of the autopilot control head's dodge buttons would have been expected to have caused the autopilot to drop from Track to Auto mode. It generally is recommended that the ST6001 not be powered by the autopilot course computer's SeaTalk port. Instead, it is recommended that the ST6001 be interfaced to a SeaTalk bus which is being powered only by the ST-STng Converter and which in turn has been interfaced to the yellow and silver terminals of one of the autopilot course computer's SeaTalk terminals. Should the problem persist and the ST-STng Converter presently have v2.01 software installed within it, then it is recommended that the ST-STng Converter's software be downgraded to v1.21 to correct the problem.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: RL70C not communicating with RC631 - Chuck - Raymarine - Moderator - 06-10-16 12:01 PM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication