[CA] [CA11] RS150 GPS receiver

[Chuck - Raymarine - Moderator]

Jvoorhies1,

The Raystar 120 GPS Sensor which will be replaced is secured to its pole mount base (not to the rail mount) via two phillips head screws. Removing these screws and lifting the Raystar 120 GPS Sensor (should cable slack permit) will allow the Raystar 120 GPS Sensor's pole mount base to be unscrewed from the rail mount. The pole mount base within the Raystar 150 Pole Mount Adapter Kit will then be screwed onto the rail mount. Complete instructions for installing the Raystar 150 Pole Mount Adapter may be found here. This is the only means developed by Raymarine to mount the RS150 to pole or rail mount.