Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Unable to see waypoints

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Unable to see waypoints
09-19-19, 12:05 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Unable to see waypoints
Welcome to the Raymarine Forum Paul,

I have been unable to duplicate the reported issue within my system. When viewing the Chart application on each MFD, regardless of which MFD is used to create the waypoint (via touching the screen at the desired location), the waypoint appears on the other MFD's screen as well. Which version of LightHouse 3 software has been installed within the MFDs? When the command sequence HOME->SETTINGS->NETWORK is commanded on either MFD, how many MFDs are listed within the Network tab?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Unable to see waypoints - Chuck - Raymarine - Moderator - 09-19-19 12:05 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication