Raymarine forum / Raymarine Forums / Fishfinders v / [DG] Axiom 7 with Rv-100 transducer.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] Axiom 7 with Rv-100 transducer.
09-20-19, 08:12 AM
Post: #12
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG] Axiom 7 with Rv-100 transducer.
Hi ystaspinar

The correct Y Cable to use with the AXIOM RV, the E66054 P66 style TX and the A80464 RV100 transducer is the A80492. Please note that in this configuraiton, there is no conical sounder operation from the RV100 transducer, since the Airmar E66054 is connected and also nte that the maximum power from the Airmar transducer is only 600W.

If you do not wish to use the RV100, then you will only need an A80489 adapter cable to connect the E66054 P66 to the AXIOM RV. Note the E66054 P66 will still only ping at 600W

Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG] Axiom 7 with Rv-100 transducer. - Derek - Raymarine - Moderator - 09-20-19 08:12 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication