[DG11] S100 installation problem

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] S100 installation problem

09-21-19, 03:00 PM (This post was last modified: 09-23-19 07:41 AM by Derek - Raymarine - Moderator.)

Post: #5

Rene.Postulart Offline

Junior Member

Posts: 5
Joined: Dec 2018
Reputation: 0

RE: [DG11] S100 installation problem

Hi Derek,

Thanks for your response. I think that the installation is like you describe how it ought to be. I might not be precise enough in describing the connection earlier. Again: The base station is connected to a ST1 three block. The ST1-STNG cable is connected form this three block to the yellow socket of the E22158 adapter. The E22158 adapter is the last terminal in the STNG network. Both the EV1 and a i70S are also connected to this adapter. I have attached three photographs whick speak for themselves. Please let me know whether the connection is OK and/or where else I should be looking for.

Thanks,

RenÃ©

Attached File(s) Thumbnail(s)