The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Autopilot power steering

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autopilot power steering
09-23-19, 03:46 AM (This post was last modified: 09-23-19 01:30 PM by Chuck - Raymarine - Moderator.)
Post: #1
mikedefieslife Offline
Junior Member
**
 		Posts: 9
Joined: Sep 2018
Reputation: 0
[CA11] Autopilot power steering
I have the EV1 autopilot package with AU200 and P70s control.

On my old Ctrek autopilot I could use the controller/remote to manually move the rudder. i.e press the left arrow and the rudder would move to port, press the right arrow and the rudder would move to starboard.

When the autopilot was actively engaged, there was also an avoidance mode that once pressed the autopilot would come 10 degrees off course, then come back course.

Is any of this possible on the EV1 system?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Autopilot power steering - mikedefieslife - 09-23-19 03:46 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication