Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST70 + SPX30: "Calibration required" warning at startup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST70 + SPX30: "Calibration required" warning at startup
09-23-19, 03:47 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST70 + SPX30: "Calibration required" warning at startup
Welcome to the Raymarine Forum Korrigan,

The reported message will be displayed when the autopilot has not (or believes it has not) performed the AutoLearn portion of SeaTrial Calibration. It is accordingly recommended that this portion of the SeaTrial Calibration be executed again. It is conceivable that the autopilot course computer may have experienced a spike in the voltage supplied to it, causing the loss of calibration data. Should the spike have been significant enough, then it is possible that the autopilot course computer may have been damaged.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST70 + SPX30: "Calibration required" warning at startup - Chuck - Raymarine - Moderator - 09-23-19 03:47 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication