Raymarine forum / Raymarine Forums / Autopilots v / is the p70 control head compatible with a 400 course computer?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
is the p70 control head compatible with a 400 course computer?
06-10-16, 03:32 PM
Post: #5
mraphael Offline
Junior Member
**
 		Posts: 18
Joined: Jun 2016
Reputation: 0
RE: is the p70 control head compatible with a 400 course computer?
Hello again - thanks for your help so far. To clarify a bit more, I have an e7 MFD, 2 i70s, and the ST6000+. The ST6000+ has two cables attached. I assume one comes from the course computer and the other goes out to the MFD? I would detach the cable from the course computer and attach that cable to the D244 and then use the new cable to connect to the p70. But what about the other cable currently attached to the ST6000+. Would I simply reconnect that one to the p70?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: is the p70 control head compatible with a 400 course computer? - mraphael - 06-10-16 03:32 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication