New Navionics Platinum+ on Classic E-80
|
06-10-16, 06:08 PM
(This post was last modified: 06-13-16 09:27 AM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: New Navionics Platinum+ on Classic E-80
Thank you for contact and I am I requested a transfer.
Person I was last working with reloaded the card with charts and sonar data ( separate loads) and I tried it on the boat and charts worked with all other things like Aerial overlay, port photos, 3D etc but Sonar did not show up. I did not get a chance to review over phone with Navionics ( too long a wait at boat) but did talk to Raymarine Multifunction display rep and he said that the Classic E-80 will only accept up to 2Ghz of data. I checked to downloads as indicated on navionics site and they state 1.41.35 KHz for the Charts and 780.93Khz for sonar data which is less than 1GB. I checked the Navionics card is had 7.46GB on an 8GB card. confusing!!! I will try them again on Monday AM. Any comments? Thank you John |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
New Navionics Platinum+ on Classic E-80 - John Russo - 06-08-16, 03:17 PM
RE: New Navionics Platinum+ on Classic E-80 - Chuck - Raymarine - Moderator - 06-08-16, 03:32 PM
RE: New Navionics Platinum+ on Classic E-80 - John Russo - 06-09-16, 07:49 PM
RE: New Navionics Platinum+ on Classic E-80 - Chuck - Raymarine - Moderator - 06-10-16, 10:33 AM
RE: New Navionics Platinum+ on Classic E-80 - John Russo - 06-10-16 06:08 PM
RE: New Navionics Platinum+ on Classic E-80 - Chuck - Raymarine - Moderator - 06-13-16, 10:39 AM
RE: New Navionics Platinum+ on Classic E-80 - John Russo - 06-13-16, 11:32 AM
RE: New Navionics Platinum+ on Classic E-80 - Chuck - Raymarine - Moderator - 06-13-16, 02:45 PM
RE: New Navionics Platinum+ on Classic E-80 - lotharjt - 07-03-16, 09:48 PM
RE: New Navionics Platinum+ on Classic E-80 - Chuck - Raymarine - Moderator - 07-05-16, 09:44 AM
|
User(s) browsing this thread: 4 Guest(s)