The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
e97 - Unable to connect to wifi
06-10-16, 08:52 PM
Post: #1
e97 - Unable to connect to wifi
I have a e97 MFD connected to a Seatalk NG network, a 418D digital radar, and a GX2200 VHF/AIS. On the NG network are four i70’s, an ev400 autopilot with a p70 controller, an itc5, and seatalk/seatalk ng converter. I have downloaded and applied the latest LH v17.45 software release and updated each component in the system as of June, 2016.
Since the e97’s installation, I have not been able to get it to connect to my home wifi. After selecting the SSID it attempts to connect and then displays a window with the following:
“Unable to connect”
“HOME-8D7A_EXT has issued an IP address which conflicts with your Raymarine network 10.0.0.3”
“Please change the access point settings or contact the network administrator”
Unfortunately, it doesn’t say which specific settings need to be changed. I looked at the Network connection details for my network, but didn’t see where the “10.0.0.3” address had been used and therefore would be in conflict. Any help would be appreciated.
Thanks in advance for the help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
e97 - Unable to connect to wifi - [email protected] - 06-10-16 08:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)