[DG11] c80 Fix Loss

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] c80 Fix Loss

09-27-19, 01:34 PM (This post was last modified: 09-30-19 07:05 AM by Derek - Raymarine - Moderator.)

Post: #10

[email protected] Offline

Junior Member

Posts: 6
Joined: Jul 2017
Reputation: 0

RE: [DG11] c80 Fix Loss

Derek -

Thanks for all the info. When I took the cover off the black connector box there was a loose white wire not connected to anything (see Photo). This white wire is in the cable coming from the back of the Raymarine C80 MF console. Shouldn't it be connected to something?. There was a small piece of black electrical tape around the brown wire in that same cable. This might be my problem. The reason I am looking at this is because I did not see the correct DC voltages as per the trouble shooting guide you guys sent to me. Thanks for any assist.

Bob

Attached File(s) Thumbnail(s)