Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Dashboard Fuel Display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Dashboard Fuel Display
10-02-19, 12:32 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Dashboard Fuel Display
Welcome back to the Raymarine Forum Thebobman,

Q. Is there a way to define what instance's data populates that gauge?
A. Yes. Please refer to the Calibrating tanks section of Chapter 5.11: Settiongs of the LightHouse 3.10 Advanced Operation Instructions. While you and change the name of the tank which will be displayed within the graphic, you will need to select that the corresponding data cells will be populated with data from Tank 1 (instance 0) and Tank 4 (instance 3) when configuring the Dashboard.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Dashboard Fuel Display - Chuck - Raymarine - Moderator - 10-02-19 12:32 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication