Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] LH2 to LH3 upgrade on gs165 - tracks missing

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] LH2 to LH3 upgrade on gs165 - tracks missing
10-02-19, 12:37 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] LH2 to LH3 upgrade on gs165 - tracks missing
Welcome back to the Raymarine Forum Kyle,

Which version of LightHouse II software was previously installed within the gS165 MFD? What version of software is presently installed within the gS165 MFD? If the specified version is not v3.10.x, then it would be recommended that the MFD's software be updated with the latest available Raymarine product software updates and the tracks be imported again from the GPX file. Should the problem persist, then it would be necessary to see your GPX file to determine whether tracks had indeed been saved within it.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] LH2 to LH3 upgrade on gs165 - tracks missing - Chuck - Raymarine - Moderator - 10-02-19 12:37 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication