Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] AIS650 no lights

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS650 no lights
10-03-19, 12:38 PM (This post was last modified: 10-03-19 01:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] AIS650 no lights
Kala,

It is recommended that the circuit supplying power to the AIS650 be switched OFF and that the PC be disconnected from the AIS650. The power circuit supplying power to the AIS650 should then be switched ON again. Should the AIS650's status LED respond in the same manner as you have stated then it would be recommended that the AIS650's Power/NMEA 0183 Cable be unplugged and tested for power. If the measured power is found to be within the operating range specified with the linked FAQ, then the AIS650 should be sent to Raymarine’s Product Repair Center to be bench checked / serviced or replaced with an AIS700.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AIS650 no lights - Kala - 10-03-19, 12:32 PM
RE: [CA11] AIS650 no lights - Chuck - Raymarine - Moderator - 10-03-19 12:38 PM
RE: [CA11] AIS650 no lights - Kala - 10-06-19, 05:22 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication