European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
[CA] [CA11] Power when interfacing seatalkng to NMEA2000
/
[CA] [CA11] Power when interfacing seatalkng to NMEA2000
|
[CA] [CA11] Power when interfacing seatalkng to NMEA2000
|
|
10-03-19, 04:10 PM
Post: #2
|
|||
|
|||
|
RE: [CA11] Power when interfacing seatalkng to NMEA2000
Welcome back to the Raymarine Forum Rom,
Please note that a SeaTalkng Spur to DeviceNet Adapter would not be used for this purpose. Please click here to view a FAQ addressing how a backbone which has been constructed from SeaTalkng networking components should be networked to a backbone which has been constructed from third party NMEA 2000 networking components featuring DeviceNet sockets. As indicated within the referenced FAQ, care must be taken to ensure that the backbone is being powered from a single 12VDC power insertion spur which is located at the approximate midpoint of the backbone's LEN load. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] Power when interfacing seatalkng to NMEA2000 - Rom - 10-03-19, 03:02 PM
RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Chuck - Raymarine - Moderator - 10-03-19 04:10 PM
RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Rom - 10-04-19, 07:41 AM
RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Chuck - Raymarine - Moderator - 10-04-19, 07:57 AM
RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Rom - 10-10-19, 10:11 AM
RE: [CA11] Power when interfacing seatalkng to NMEA2000 - Chuck - Raymarine - Moderator - 10-10-19, 10:42 AM
|
User(s) browsing this thread: 2 Guest(s)