Raymarine forum / Raymarine Forums / Multifunction Displays v / New Navionics Platinum+ on Classic E-80

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Navionics Platinum+ on Classic E-80
06-13-16, 11:32 AM (This post was last modified: 06-13-16 02:38 PM by Chuck - Raymarine - Moderator.)
Post: #7
John Russo Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2016
Reputation: 0
RE: New Navionics Platinum+ on Classic E-80
Thank you for the reply. Sorry about the Hz connotation. I am a retired Electrical engineer. 1000 kHz is a gigabit .
My new and Navionics reloaded card in now working on my E-80 after a couple of attempts. Everything seems to be functioning, Charts, 3D, Aerial overlay, Sonar etc. What they failed to tell me was that I had to switch to Fish for the sonar plots and even then I can only get them operating at a range of 1 NM full screen. I was hoping to supplement my navigation using the sonar charts as I am sailor and don't fish. Should I be able to view sonar at greater chart coverage like 3-5 Nm? I have asked Navionics this question and don't have a response yet. What is your experience on your E-80?

John
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: New Navionics Platinum+ on Classic E-80 - John Russo - 06-13-16 11:32 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication