[CA] [CA11] Autopilot Upgrade

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum Barry,

Q1. I would like to know if I can keep my current hydraulic pump from the ST6001 and S2G 12091 system, and just replace with the new ACU and Sensor Core.
A1. Yes.

Q2. would like to know if I can use the ACU 150 and EV1, or do i have to go with the ACU 200 and the EV2?
A2. An EV-2 CCU would not be applicable to an autopilot for this system ... an EV-1 CCU would need to be included. If an M81120 Type 1 12v Hydraulic Pump (examine label affixed to the pump) was installed and should the vessel feature a 12VDC power distribution system, then an ACU150 may be used. The EV-1 CCU, ACU150, p70RS, and Evolution Cabling Pack are included within the T70407 EV-150 Core Pack.