Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Software Glitch - Axiom 12

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Software Glitch - Axiom 12
10-12-19, 01:43 PM (This post was last modified: 10-14-19 07:38 AM by Chuck - Raymarine - Moderator.)
Post: #18
[email protected] Offline
Junior Member
**
 		Posts: 21
Joined: May 2016
Reputation: 0
RE: [CA11] Software Glitch - Axiom 12
Hello Chuck,
Here is couple log I was able to get. This include engine start and cruising at 30mph. I'm including the diagnostic file that outlilne all peripheral on my network. Keep in mind that my Mercruiser Gatway is filtered by my YATCHD bridge preventing some data to be transfer to the electronic network. (J1939 engine data...See list on the other post)
The boat is going out of the water on Wednesday night (oct 16). Let me know before if additional test is required to help.
David


Attached File(s)
.json  Diagnostics_.json (Size: 4.51 KB / Downloads: 207)
.log  nmea2000_20191012_1.log (Size: 3.73 MB / Downloads: 216)
.log  nmea2000_20191012_2.log (Size: 1.42 MB / Downloads: 211)
.log  nmea2000_20191012_3.log (Size: 1.74 MB / Downloads: 619)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Software Glitch - Axiom 12 - [email protected] - 10-12-19 01:43 PM

Forum Jump:


User(s) browsing this thread: 7 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication