[CA] [CA11] Upgrade E80 MFDs and Pathfinder Radar Integration

[R2Straebel]

Thank you for your previous guidance. I am getting ready to place my order.

My S3G AST course computer/control head/remote, STLK1 ST60 and STLK2 290 instruments are processed through a DPU. The DPU is then connected to two (2) jumpered 5-plug STLK2 junction blocks. Transducer pods and RF ground are also connected to the STLK2 junction blocks. One of the jumpered STLK2 junction blocks is then connected to my “master” MFD with a 5-pin STLK2 cable (both ends).

Given that my STLK1 components are already running through the DPU into a STLK2 cable, do I need a STLK1 to STLKng converter in my STLKng backbone?

Thank you.