Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Upgrade E80 MFDs and Pathfinder Radar Integration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade E80 MFDs and Pathfinder Radar Integration
10-15-19, 03:34 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Upgrade E80 MFDs and Pathfinder Radar Integration
R2Straebel,

Q. Given that my STLK1 components are already running through the DPU into a STLK2 cable, do I need a STLK1 to STLKng converter in my STLKng backbone?
A. Yes. Because the SeaTalk2 backbone components were not supported for use within the same backbone are currently manufactured products, it would be recommended that a SeaTalk to SeaTalkng Converter be used to bridge data between the ST290 DPU's SeaTalk port and the new equipment.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrade E80 MFDs and Pathfinder Radar Integration - Chuck - Raymarine - Moderator - 10-15-19 03:34 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication