[CA] [CA11] Upgrade E80 MFDs and Pathfinder Radar Integration

[Chuck - Raymarine - Moderator]

R2Straebel,

Please note that the supplied diagram differs from Raymarine's recommendations regarding how an E-Series Classic MFD would have been recommended to to be interfaced to the ST290 system. The last recommendation on such recommended that the E-Series Classic MFD not be interfaced to the SeaTalk2 backbone and instead be interfaced to the SeaTalk bus to which other devices having a SeaTalk interface (ex. S3G, ST6001, etc. were interfaced. Please refer to the FAQ referenced within my earlier post addressing how to interface MFDs featuring a SeaTalkng / NMEA 2000 communications interface to legacy devices having a SeaTalk communications interface via a SeaTalk to SeaTalkng Converter(s). Like the S3G, the DPU features a powered SeaTalk communications interface. Accordingly, when connecting the SeaTalk bus to the DPU, the SeaTalk cable's red lead should not be connected to the DPU's red SeaTalk terminal per my earlier response.