Short Arm Wind Vane PT# E22078

[rwt1580006]

I wish to perform a bench test of a short arm wind vane transducer. I understand there are five conductors - Power/Common/Sine/Cosine/Speed and I have read the mast head test thread. I will remove the transducer from the mast head and bring it down for a bench test. The base and cable will stay with the vessel. Is there a reference diagram of the connecter between the arm and the base such that I can correctly connect power/com and make readings on the remaining conductors? I know generally, Raymarine products are based on the Turck Eurofast line of connecters albeit with mechanical modifications.