The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] AIS on an Element 7

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS on an Element 7
10-24-19, 08:56 AM (This post was last modified: 10-24-19 12:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 6
Joined: Sep 2019
Reputation: 0
[CA11] AIS on an Element 7
I have just upgraded my Raymarine plotter from an A50 (just using nmea0183) to an Element 7 with Seatalkng network.

My AIS transceiver (Comar CSB200) outputs NMEA0183 which I now convert to N2K/Seatalkng using a Quark A032ais converter.

This device is recognised by the plotter as a connected network device and communication seems to be taking place but no AIS related menu items appear on the plotter, e.g. AIS is not listed in the available alarm configuration table.
What am I doing wrong?
Thanks
Chris
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] AIS on an Element 7 - [email protected] - 10-24-19 08:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication