Sea Talk multiple equipments

[Chuck - Raymarine - Moderator]

Paulo,

With respect to creation of the SeaTalkng backbone and interfacing the products, the only comment change which I would recommend is that SeaTalkng Power Cable be interfaced to a spur socket that is located at the approximate mid-point of the backbone's LEN load. It should additionally be noted that the ACU-200's SeaTalkng power switch should be configured to the off position.

With respect to Ethernet networking, the MFDs will not be able to share cartography, radar imagery, fishfinder imagery, or waypoint/route/track data with one another when installed per your diagram. Please refer to my initial response regarding installation of a HS5 RayNet Network Switch and then interfacing the MFDs and radome to the network switch.