The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Integration S3G Pilot and P70s with Axiom
10-29-19, 12:47 AM (This post was last modified: 10-30-19 08:53 AM by Chuck - Raymarine - Moderator.)
Post: #1
Rainbow [TG11] Integration S3G Pilot and P70s with Axiom
Integration S3G Smart Pilot and P70s with new Axiom
Displays of our C70 Chartplotter and ST6001 are not working anymore and we want to get an Axiom 7” or 9” and new P70s Autopilot Control, a RS150 GPS Receiver and also the AIS 700.
1. We have connected i50 Tridata to ST60+Wind via A06047 STng to ST cable and want to connect the new P70s also via A06047 to the ST60+. We would then connect the other port of the P70s again via A06047 to the S3G Smart Pilot Computer. Is that possible? The info we got is that P70s can’t be calibrated but will steer to WP set on Axiom?
2. We would connect the S3G to the Axiom via the 5-way ST to STng RS52131 (yellow terminal) and an A06045 STng to Devicenet cable (white terminal).
3. We would connect the AIS 700 and the RS150 to a 5-way connector and via a STng backbone cable to the RS52131 (blue terminal). Would this configuration work?
4. Do we need the RS150 as the AIS 700 has also a GPS?
5. Any suggestion for a compatible Radar?
I have attached a diagram of the configuration.
Thanks for your help
Claudia
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Integration S3G Pilot and P70s with Axiom - Claudia - 10-29-19 12:47 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)