Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Analog Wind Input to Tacktick

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Analog Wind Input to Tacktick
10-29-19, 08:41 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Analog Wind Input to Tacktick
Welcome to the Raymarine Forum Neil,

Yes. TackTick equipment may either be the originator of data (i.e. via Tack Tick transducers and instrument) or may repeat data from a NMEA 0183 (via T122 Wireless Interface) or SeaTalkng / NMEA 2000 (via MicroTalk Wireless Gateway) sources. Calibration of instrument data must be performed via the instrument responsible for originating such data. Accordingly, should the Tack Tick equipment not be the source of wind data, then calibration of wind data would not be accomplished via the Tack Tick equipment.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Analog Wind Input to Tacktick - Chuck - Raymarine - Moderator - 10-29-19 08:41 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication