SmartController and new EV200 autopilot

[PaulM]

I have had a SmartController in use with my original autopilot system (S1 course computer and ST6001 control head). It worked fine.

Just replaced the autopilot with a new EV200 Sail system. All electronics are up to date with the latest software versions.

The SmartController works with the new system except for one thing. The rudder position bar at the bottom of the display on the SmartController does not work. It almost always shows the position as hard over to starboard, even though that is not true. Other position indicators (on the P70 and e95) are accurate, but not the SmartController.

Advice? Thanks.

Paul