[CA] [CA11] NMEA logs-can't select SD2

[Chuck - Raymarine - Moderator]

Bernie,

The problem regarding the NMEA 2000 logs not being saved to the selected drive has been logged an should be corrected within a future software update. That said, should the microSD memory card to which logs will be saved be inserted in SD slot 1 (upper) and should the recording destination be configured to this same drive, then execution of the initially specified command should yield a log file similarly titled to "nmea2000_20191118_14.log". The file which you attached is not a NMEA 2000 log file.

Please additionally note that LightHouse 3 v3.11.42 was released late last week and was to include corrections to the Fuel Manager feature. Before submitting any additional logs, it is recommended that this version of software be installed and that the system be tested again. Should the problem persist, then it would be recommended that a It is recommended the Power ON Factory Reset procedure be executed on each of the system's MFDs to correct the reported behavior and that the MFD(s) then be manually reconfigured (not restored from a system settings file). Should the problems persist after having performed the items recommended above, then please follow up with the previously requested NMEA 2000 log.