[CA] [CA11] Group illumination

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Caladh1990,

The list of displayed groups abbreviations should include the following:
- GP1 (Group-1)
- GP2 (Group-2)
- GP3 (Group-3)
- GP4 (Group-4)
- GP5 (Group-5)
- nSE (E symbol is missing upper horizonal bar) (assumed to be Mast by process of elimination)
- FLY (Flybridge
- CPE (E symbol is missing upper horizonal bar) (I believe that this group corresponds to Cockpit on the MFD)
- HL2 (Helm-1)
- HL1 (Helm-1)

When no shared illumination group has been selected, OFF (or the currently selected group) will be indicated. After using the button presses specified within the user's guide to enable selection of a group, causing OFF (or the currently selected group) to flash. Then using the specified buttons, the list may be scrolled up or down. When the desired group is listed, then use the button presses specified within the user's guide to save the configured group ... the selected group name will no longer flash.

The most challenging part of the process is pressing keys simultaneously to cause the desired action. Should a quick single beep be hear and the selected group not flash or not stop flashing, then the key press has been interpreted as a single key press rather than a simultaneous key press, necessitating that the action be repeated.