Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] eS127 re-boot using LH 3

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] eS127 re-boot using LH 3
11-23-19, 09:39 PM (This post was last modified: 11-24-19 12:21 PM by Chuck - Raymarine - Moderator.)
Post: #5
nharrison5 Offline
Junior Member
**
 		Posts: 28
Joined: Jul 2016
Reputation: 0
RE: [TG11] eS127 re-boot using LH 3
I installed the new version of LH 3. The truncation only happens with the plotter sync through Navionics. The Navionics software shows the full name. The MFD truncates to 16 characters.

When I import the routes from a card, they show the full name on the MFD.

Incidentally, I was unable to get the plotter sync to work after the update to the latest version.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] eS127 re-boot using LH 3 - nharrison5 - 11-23-19 09:39 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication