[CA] [CA11] Integrating a 250 AIS

[Chuck - Raymarine - Moderator]

Tim,

Q. But on the SHS unit itself only the white or green wires are connected... Do the yellow and brown wires need adding?
A. Please note that my instructions called for the MFD's Port 1 leads (white, green, yellow, and brown) to be interfaced to the AIS250's 38400 BAUD NMEA 0183 terminals. This Port must then be configured to AIS 38400. Please not that the SHS does not feature leads, but instead features terminals. The MFD's Port 2 leads (white/orange and green/orange) must be connected to the SHS's NMEA 0183 Input terminals. The MFD's Port 2 must then be configured to NMEA 4800 to match the BAUD rate to the SHS's NMEA 0183 communications interface.