[CA] [CA11] Transducer choice confusion

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Glennmac,

Unfortunately the RV thru-hull transducers are designed to be installed directly to the hulls surface (i.e. no fairing block). If seeking RealVision, SideVision, DownVision, or low power / high frequency sonar imaging then a RV pair (in this case a 12 degree pair (ex. RV-312)) would need to be installed. Please additionally note that if the currently installed transducer is operational and had been interfaced to a DSM250, DSM30, or DSM300 for use with the C120, then it may be adapted for use with your Axiom RV MFD. Raymarine also offers a Y-Cable adapter to permit both RV transducers and transducers which had be designed for use with a DSM250, DSM30, or DSM300 to be simultaneously used with an Axiom RV MFD.